{"title":"Lighting Controls","description":null,"products":[{"product_id":"ms-z101-iv","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-IV, Ivory","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-IV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276099868\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113116012,"sku":"MS-Z101-IV","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-IV_NoWallPlate.jpg?v=1792646320"},{"product_id":"ms-z101-ht","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-HT, Hot","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-HT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276100083\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113148780,"sku":"MS-Z101-HT","price":101.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-HT_NoWallPlate.jpg?v=1792646320"},{"product_id":"ms-z101-gr","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-GR, Gray","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-GR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276099882\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113214316,"sku":"MS-Z101-GR","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-GR_NoWallPlate.jpg?v=1792646321"},{"product_id":"ms-z101-br","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-BR, Brown","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-BR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276099899\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113378156,"sku":"MS-Z101-BR","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-BR_NoWallPlate.jpg?v=1792646322"},{"product_id":"ms-z101-bl","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-BL, Black","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-BL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276099905\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.33 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113410924,"sku":"MS-Z101-BL","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-BL_NoWallPlate.jpg?v=1792646323"},{"product_id":"ms-z101-bi","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-BI, Biscuit","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-BI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276099936\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113509228,"sku":"MS-Z101-BI","price":101.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-BI_NoWallPlate.jpg?v=1792646324"},{"product_id":"ms-z101-al","title":"Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch, 8A, Neutral Optional, 120-277V, Single Pole\/Multi-Location, MS-Z101-AL, Almond","description":"\u003cp\u003eThe Lutron Maestro 0-10V Motion Sensor\/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor\/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. Use the raise\/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Maestro 0-10V Motion Sensor\/Dimmer Switch; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated for all drivers that provide a source current up to 8A switching LED driver\/4.4A Fan (1\/6 HP) with a 50mA max sink current; Neutral Optional\u003c\/li\u003e\n\u003cli\u003eScrew Terminal and Wire-Lead Installation; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole\/Multi-location switching with Lutron Maestro Companion switches (MA-AS); Compatible with an existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eCustomize both dimmer and sensor functions with easy to read programming buttons directly on dimmer sensor\u003c\/li\u003e\n\u003cli\u003eComplies with Title 24 requirements for multi-level lighting control\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough light is present in the room\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-Z101-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e784276099875\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369833.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/032504.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113673068,"sku":"MS-Z101-AL","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-Z101-AL_NoWallPlate.jpg?v=1792646325"},{"product_id":"ms-vps6m2-dv-wh","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-WH, White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984591\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113738604,"sku":"MS-VPS6M2-DV-WH","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-WH_nowallplate.jpg?v=1792646325"},{"product_id":"ms-vps6m2-dv-tp","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-TP, Taupe","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-TP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984577\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113935212,"sku":"MS-VPS6M2-DV-TP","price":70.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-TP_NoWallPlate.jpg?v=1792646326"},{"product_id":"ms-vps6m2-dv-sw","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-SW, Snow White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-SW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984553\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795113967980,"sku":"MS-VPS6M2-DV-SW","price":70.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-SW_NoWallPlate.jpg?v=1792646327"},{"product_id":"ms-vps6m2-dv-pd","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-PD, Palladium","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-PD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984508\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114000748,"sku":"MS-VPS6M2-DV-PD","price":70.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-PD_NoWallPlate.jpg?v=1792646328"},{"product_id":"ms-vps6m2-dv-mn","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-MN, Midnight","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-MN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114131820,"sku":"MS-VPS6M2-DV-MN","price":70.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-MN_NoWallPlate.jpg?v=1792646328"},{"product_id":"ms-vps6m2-dv-la","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-LA, Light Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-LA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984454\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114230124,"sku":"MS-VPS6M2-DV-LA","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-LA_NoWallPlate.jpg?v=1792646329"},{"product_id":"ms-vps6m2-dv-iv","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-IV, Ivory","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-IV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984447\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114262892,"sku":"MS-VPS6M2-DV-IV","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-IV_NoWallPlate.jpg?v=1792646330"},{"product_id":"ms-vps6m2-dv-ht","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-HT, Hot","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-HT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114295660,"sku":"MS-VPS6M2-DV-HT","price":70.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-HT_NoWallPlate.jpg?v=1792646331"},{"product_id":"ms-vps6m2-dv-gr","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-GR, Gray","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-GR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114492268,"sku":"MS-VPS6M2-DV-GR","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-GR_NoWallPlate.jpg?v=1792646331"},{"product_id":"ms-vps6m2-dv-br","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-BR, Brown","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-BR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984379\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114525036,"sku":"MS-VPS6M2-DV-BR","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-BR_NoWallPlate.jpg?v=1792646332"},{"product_id":"ms-vps6m2-dv-bl","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-BL, Black","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-BL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984362\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114623340,"sku":"MS-VPS6M2-DV-BL","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-BL_NoWallPlate.jpg?v=1792646333"},{"product_id":"ms-vps6m2-dv-bi","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-BI, Biscuit","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-BI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984355\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114787180,"sku":"MS-VPS6M2-DV-BI","price":70.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-BI_NoWallPlate.jpg?v=1792646333"},{"product_id":"ms-vps6m2-dv-al","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Neutral Optional, 6A Light, 3A Fan, 120-277V, Single\/Multi-Location, MS-OPS6M2-DV-AL, Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights on and off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 6A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 6A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 6A lighting, 3A Fan or 3A combined Light\/Fan; 120-277V\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS6M2-DV-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557984331\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114819948,"sku":"MS-VPS6M2-DV-AL","price":60.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS6M2-DV-AL_NoWallPlate.jpg?v=1792646334"},{"product_id":"ms-vps5m-wh","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-WH, White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish, Clamshell packaging\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983846\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114852716,"sku":"MS-VPS5M-WH","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom__MS-VPS5M-WH_nowallplate_71767384-0c8b-492c-a6f5-7175cd49715f.jpg?v=1792646335"},{"product_id":"ms-vps5m-tp","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-TP, Taupe","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-TP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983822\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795114885484,"sku":"MS-VPS5M-TP","price":57.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-TP_NoWallPlate.jpg?v=1792646336"},{"product_id":"ms-vps5m-sw","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-SW, Snow White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-SW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983808\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115082092,"sku":"MS-VPS5M-SW","price":57.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-SW_NoWallPlate.jpg?v=1792646336"},{"product_id":"ms-vps5m-pd","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-PD, Palladium","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-PD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983754\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115114860,"sku":"MS-VPS5M-PD","price":57.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-PD_NoWallPlate.jpg?v=1792646337"},{"product_id":"ms-vps5m-mn","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-MN, Midnight","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-MN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983723\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115180396,"sku":"MS-VPS5M-MN","price":57.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-MN_NoWallPlate.jpg?v=1792646338"},{"product_id":"ms-vps5m-la","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light,3A Fan,120V, Single\/Multi-Location, MS-VPS5M-LA, Light Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-LA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983709\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115377004,"sku":"MS-VPS5M-LA","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-LA_NoWallPlate_464be1a3-55c8-4c79-9dab-a3d9204099dc.jpg?v=1792646339"},{"product_id":"ms-vps5m-iv","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-IV, Ivory","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-IV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983693\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115442540,"sku":"MS-VPS5M-IV","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-IV_NoWallPlate_e51d9134-bc67-4658-89f9-b537fb650570.jpg?v=1792646339"},{"product_id":"ms-vps5mh-wh","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5MH-WH, White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish, Clamshell packaging\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5MH-WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983921\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115475308,"sku":"MS-VPS5MH-WH","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom__MS-VPS5M-WH_nowallplate.jpg?v=1792646340"},{"product_id":"ms-vps5m-ht","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-HT, Hot","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-HT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983686\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115540844,"sku":"MS-VPS5M-HT","price":57.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-HT_NoWallPlate.jpg?v=1792646341"},{"product_id":"ms-vps5mh-la","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light,3A Fan,120V, Single\/Multi-Location, MS-VPS5MH-LA, Light Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish, Clamshell packaging\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5MH-LA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983914\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115704684,"sku":"MS-VPS5MH-LA","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-LA_NoWallPlate.jpg?v=1792646341"},{"product_id":"ms-vps5mh-iv","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5MH-IV, Ivory","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish, Clamshell packaging\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5MH-IV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983907\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115737452,"sku":"MS-VPS5MH-IV","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-IV_NoWallPlate.jpg?v=1792646342"},{"product_id":"ms-vps5mh-al","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5MH-AL, Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish, Clamshell packaging\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5MH-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983891\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115802988,"sku":"MS-VPS5MH-AL","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-AL_NoWallPlate_8c5676c7-190c-4082-b5dc-07d28e56edf9.jpg?v=1792646343"},{"product_id":"ms-vps5m-gr","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-GR, Gray","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-GR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795115966828,"sku":"MS-VPS5M-GR","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-GR_NoWallPlate.jpg?v=1792646344"},{"product_id":"ms-vps5m-br","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-BR, Brown","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-BR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116032364,"sku":"MS-VPS5M-BR","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-BR_NoWallPlate.jpg?v=1792646344"},{"product_id":"ms-vps5m-bl","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-BL, Black","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-BL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983617\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116228972,"sku":"MS-VPS5M-BL","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-BL_NoWallPlate.jpg?v=1792646345"},{"product_id":"ms-vps5m-bi","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-BI, Biscuit","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-BI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116491116,"sku":"MS-VPS5M-BI","price":57.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-BI_NoWallPlate.jpg?v=1792646346"},{"product_id":"ms-vps5m-al","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 5A Light, 3A Fan, 120V, Single\/Multi-Location, MS-VPS5M-AL, Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 5A for any lighting type, 3A fan or 3A for combined light\/fan. Install in a single pole, 3-way with one existing switch, or with Maestro companion switches (MA-AS\/MSC-AS) to switch from up to 9 locations. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 5A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 5A lighting, 3A Fan or 3A combined Light\/Fan; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole or Multi-Location with Lutron Maestro Companion Switch (MA-AS\/MSC-AS); Compatible with one existing 3-way switch\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS5M-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983587\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301647.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116523884,"sku":"MS-VPS5M-AL","price":46.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS5M-AL_NoWallPlate.jpg?v=1792646346"},{"product_id":"ms-vps2-wh","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-WH, White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983099\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116589420,"sku":"MS-VPS2-WH","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-WH_nowallplate_a84822c8-b126-41cf-9cdb-31d73d1a9cf5.jpg?v=1792646347"},{"product_id":"ms-vps2-tp","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-TP, Taupe","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-TP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116786028,"sku":"MS-VPS2-TP","price":43.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-TP_NoWallPlate.jpg?v=1792646348"},{"product_id":"ms-vps2-sw","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-SW, Snow White","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-SW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116818796,"sku":"MS-VPS2-SW","price":43.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-SW_NoWallPlate.jpg?v=1792646349"},{"product_id":"ms-vps2-pd","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-PD, Palladium","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-PD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795116851564,"sku":"MS-VPS2-PD","price":43.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-PD_NoWallPlate.jpg?v=1792646349"},{"product_id":"ms-vps2-mn","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-MN, Midnight","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-MN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982979\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795117408620,"sku":"MS-VPS2-MN","price":43.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-MN_NoWallPlate.jpg?v=1792646350"},{"product_id":"ms-vps2-la","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-LA, Light Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-LA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982955\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795117506924,"sku":"MS-VPS2-LA","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-LA_NoWallPlate.jpg?v=1792646351"},{"product_id":"ms-vps2-iv","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-IV, Ivory","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-IV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982948\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795117539692,"sku":"MS-VPS2-IV","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-IV_NoWallPlate.jpg?v=1792646352"},{"product_id":"ms-vps2h-wh","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-WH, White","description":"\u003cp\u003eCoordinating Claro wallplate and accessories sold separately. Let Lutron's Maestro Vacancy Sensor switch automatically turn lights off for you. It's a simple, easy, and low cost way to save energy and add light automation to your home. Simply turn lights on when you enter a room, and the Maestro Vacancy Sensor will automatically turn lights off when room is vacant. With manual-on feature, the vacancy sensor is perfect for use in a bedroom or TV room so lights\/fan only turn on when you want them to. Install it in the kids' rooms and never worry about lights being left on by mistake. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Maestro Sensors work with any bulb type, including CFLs and LEDs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCoordinating claro wall plate and accessories sold separately\u003c\/li\u003e\n\u003cli\u003eAutomatically turns lights off when room is unoccupied\u003c\/li\u003e\n\u003cli\u003eUses advanced XCT sensing technology, offering the most reliable on\/off performance up to 30 ft.\u003c\/li\u003e\n\u003cli\u003eWorks with all bulb types\u003c\/li\u003e\n\u003cli\u003eMeets California Title 24 and other sensor code requirements\u003c\/li\u003e\n\u003cli\u003eSimple, easy, and low cost way to bring light automation to your home\u003c\/li\u003e\n\u003cli\u003eGreat for bedrooms, kid rooms and rooms with pets\u003c\/li\u003e\n\u003cli\u003eSimple, easy and low cost way to bring light automation to your home\u003c\/li\u003e\n\u003cli\u003eSleek design of Maestro controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2H-WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983174\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795117736300,"sku":"MS-VPS2H-WH","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-WH_nowallplate.jpg?v=1792646353"},{"product_id":"ms-vps2-ht","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-HT, Hot","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Satin Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-HT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982931\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795117998444,"sku":"MS-VPS2-HT","price":43.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-HT_NoWallPlate.jpg?v=1792646353"},{"product_id":"ms-vps2h-la","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2H-LA, Light Almond","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish, Clamshell Packaging\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2H-LA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557983167\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795118031212,"sku":"MS-VPS2H-LA","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-LA_WithWallPlate.jpg?v=1792646354"},{"product_id":"ms-vps2-gr","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-GR, Gray","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-GR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982917\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795118063980,"sku":"MS-VPS2-GR","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-GR_NoWallPlate.jpg?v=1792646355"},{"product_id":"ms-vps2-br","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-BR, Brown","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-BR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795118162284,"sku":"MS-VPS2-BR","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-BR_NoWallPlate.jpg?v=1792646355"},{"product_id":"ms-vps2-bl","title":"Lutron Maestro Motion Sensor Switch, Vacancy Only, Ground or Neutral Required, 2A Lighting, 120V, Single Pole, MS-VPS2-BL, Black","description":"\u003cp\u003eThe Lutron Maestro Motion Sensor Switch (vacancy only) features Lutron’s advanced motion sensing technology to automatically turn the lights off, or manually toggle the lights with the tap switch. This Vacancy Sensor Switch is rated up to 2A for any lighting type and is single pole only. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensor to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Lutron sensors also have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. Switch the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. The sensitivity of the PIR sensor can also be changed so it only detects larger motion Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes (1) Lutron Maestro 2A Motion Sensor Switch, Vacancy Only; Gloss Finish\u003c\/li\u003e\n\u003cli\u003eRated to work with up to 2A lighting; 120V\u003c\/li\u003e\n\u003cli\u003eSingle Pole only\u003c\/li\u003e\n\u003cli\u003eWire-Lead installation; Ground or Neutral Required\u003c\/li\u003e\n\u003cli\u003eFeatures passive infrared (PIR) motion detection with exclusive Lutron XCT Technology for fine motion detection, which is 2-3x better at picking up motion than other manufacturers\u003c\/li\u003e\n\u003cli\u003e180-degree sensor field of view (900 sq ft major motion \u0026amp; 400 sq ft minor motion coverage); Tamper-resistant lens\u003c\/li\u003e\n\u003cli\u003eSmart Ambient Light Detection (ALD) can be programmed so lights stay off if enough natural light is present in the room\u003c\/li\u003e\n\u003cli\u003eEasy button programming to customize timeout, sensor mode, or sensitivity\u003c\/li\u003e\n\u003cli\u003eComplies with Title 20\/24 Section 110.9 for “automatic shutoff”\u003c\/li\u003e\n\u003cli\u003eAvailable in 10+ colors; Pairs perfectly with Lutron Claro wall plates for consistent color matching (wall plates are sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-VPS2-BL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e027557982863\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Order Qty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.55 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369666.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/0301654.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/assets.lutron.com\/a\/documents\/369-119_Wallbox_Warranty.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWarranty (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Lutron","offers":[{"title":"Default Title","offer_id":67795118293356,"sku":"MS-VPS2-BL","price":32.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/5803\/2492\/files\/Ecom_MS-VPS2-BL_NoWallPlate.jpg?v=1792646357"}],"url":"https:\/\/ielectricsupply.com\/collections\/lighting-controls.oembed","provider":"iElectric Supply","version":"1.0","type":"link"}